|
|
|
To Order,
Please Call 623-581-1994 |
|
|
|
Belly Pans |
 |
GSG Belly Pan "Road" |
Fiberglass, Unpainted Mounts to original mounting points |
US$380.00 |
 |
Metisse Belly Pan |
ABS
Plastic Front piece black or carbon optic, side pieces silver. |
Black US$345.00 Carbon Optic |
 |
Hagen Belly Pan |
Fiberglass, Unpainted Mounting Hardware Included |
US$330.00 |
 |
PB Belly Pan |
Carbon Fiber Silver Meshing Gold Mesh please add US$20.00 Made by order only |
US$435.00 |
|
Front Fenders |
 |
RF Front Fender |
Fiberglass, Unpainted Billet mounting brackets black Limited Edition |
US$290.00 |
 |
GSG Front Fender |
Fiberglass, Unpainted | US$230.00 |
 |
PB Front Fender Carbon |
Carbon Fiber Silver or Gold Mesh Made by order only |
US$235.00 |
|
Rear Huggers |
 |
Metisse Rear Hugger |
ABS
Plastic Black or Carbon Optic Mounting Hardware Included |
Black US$170.00 Carbon Optic |
 |
PB Rear Hugger |
ABS
Plastic, Smooth and Shiny Surface Mounting Hardware Included Available in Black or Carbon Optic Silver or Gold Mesh |
Click here for Pricing |
 |
PB Rear Hugger Carbon |
Carbon Fiber Silver or Gold Mesh Made by order only |
Click here for Pricing |
|
Chain Guard |
 |
PB Chain Guard |
Carbon Fiber Made by order only |
US$100.00 |
|
Radiator Side Covers |
 |
GSG Radiator Side Covers |
Fiberglass
Unpainted Black Surface |
US$225.00 |
 |
PB Radiator Side Covers |
Carbon Fiber Silver or Gold Mesh Made by order only |
US$325.00 |
|
Radiator Covers |
 |
PB Radiator Front Cover |
Stainless Polished Water and oil cooler cover. |
US$185.00 |
|
Tank / Frame Covers |
 |
GSG Tank / Frame Covers |
Fiberglass Unpainted, Black Surface Available without signals, openings covers with race mashing. Available with LED signals, tinted glass, rear opening covers with race meshing. 100 mm / 4 inches more narrow each side than the original. |
Without Turn Signals US$470.00 With Turn Signals |
 |
PB Tank / Frame Covers |
Carbon Fiber Silver or Gold Mesh Made by order only |
US$505.00 |
|
Seat Cowl |
 |
PB Seat Cowl |
Carbon Fiber Made by order only |
US$230.00 |
 |
PB End Piece |
Carbon Fiber Made by order only |
US$210.00 |
|
Sliders / Protectors |
|
Metisse X-Pad Sliders/Protectors |
Introducing a
new generation of crash pads: |
Pricing, please click here |
    |
GSG Crash Protector
GSG Crash Protector
GSG Crash Protector |
CNC machined aluminum
brackets
Frame Sliders, Engine Protectors,
No modifications.
|
Pricing, please click here |
 |
GSG Push on Shock Absorption Caps |
Fits all GSG-Moto / Moko sliders with
a central mounting hole which are made over the past 18 years. Set of three More information, click here |
US$25.00 |
|
Cockpit Screens |
 |
GSG Windscreen "Speed Screen" |
Smoke Tinted Screen Stainless Steel Brackets Mounting on Triple Tree Good Wind protection |
Smoke Tint US$245.00 |
 |
GSG Windscreen "Speed Screen" |
Black Tinted Screen Stainless Steel Brackets Mounting on Triple Tree Good Wind protection |
Black Tint US$260.00 |
|
Side Covers/Tank Covers |
 |
PB Lower Side Cover |
Carbon Fiber Made by order only |
US$275.00 |
 |
PB Upper Side Cover |
Carbon Fiber Made by order only |
US$275.00 |
 |
PB Dash Panel |
Carbon Fiber Made by order only |
US$235.00 |
|
Engine Covers |
 |
GSG Clutch Cover |
CNC Machined
Aluminum Clutch Cover with window |
US$1000.00 |
 |
GSG Engine Cover Left |
Engine Cover Left with integrated Crash Protector CNC Machined Aluminum |
US$500.00 |
 |
GSG Clutch Insert |
Black Plastic
with silver aluminum screws Colored aluminum screws please add US$15.00 |
US$115.00 |
 |
GSG Sprocket Cover |
CNC Machined
Aluminum Will not work on California models with EVAP canister installed. |
US$250.00 |
 |
PB Clutch Insert |
Carbon Fiber Made by order only |
US$60.00 |
 |
PB Sprocket Cover |
Carbon Fiber Made by order only |
US$180.00 |
|
License Plate Bracket & Tail Lights |
 |
Metisse Plate Bracket with Dual Tail Light |
Stainless Steel
polished or Black Dual LED Tail Light with integrated plate light. Turn Signals are not included It is recommended to install Kellermann Micro or Rhombus signals. |
US$225.00 |
|
Headlight Kits |
 |
GSG Dual Headlight |
Black or Chrome
Housing Fork Clamps, Turn Signal Brackets Low Beam H7/50W, High Beam H4/60W Fly-Screens
for Round and Dual-Headlights |
US$390.00 |
 |
GSG Square Headlight |
Chrome
Housing Fork Clamps, Turn Signal Brackets H4 |
US$390.00 |
|
Fairings |
 |
Big Bike Fairing BV 312 |
Universal, Fiberglass,
unpainted |
US$660.00 |
 |
Big Bike Fairing BV 307 |
Universal |
US$660.00 |
 |
Bike Side Fairing B3 |
Fiberglass, unpainted |
US$550.00 |
 |
Bike Side Fairing B4 |
Fiberglass, unpainted Smoke Gray Windscreen Head-Lights Mounting Hardware |
US$600.00 |
|
Turn Signal Brackets |
 |
GSG CNC Turn Signal Brackets |
CNC Machined or
Black Anodized Fork Diameter 35, 36, 37, 38, 39, 40, 41, 43, 45, 46,48,50, 52, 56, 60 mm |
Aluminum Nature US$100.00 Anodized Black |
 |
Turn |
Stainless Steel Necessary if some headlight or fairings are mounted 31-34, 35-38, 39-42, 43-46, 47-50, 51-54, 55-58 mm |
Pair 31-42 mm |
|
Slip Ons |
 |
Bodis Slip On |
Kit Includes: Bordis Slip On "Oval Q5" with Carbon Cover (left-right-upper), License plate bracket with LED tail light, LED plate light, reflector and all mounting hardware. 8.5 kg (approx. 16 pounds lighter) Our opinion: B & B belong together (B-King & Bordis) |
Stainless Polished US$1950.00 Titanium |
|
Foot Peg Lowering / Replacement Pegs |
 |
GSG Foot Peg Lowering Kit |
Rider or Passenger 22 mm, 30 mm or 50 mm lower Complete Suzuki Click Here |
Starts at US$170.00 a set |
 |
GSG Passenger Peg Adapters |
Passenger
Peg Adapters Black Anodized 30 mm lower, 45 mm to the front |
US$85.00 |
 |
GSG Rider Foot Pegs |
Replacement Foot Pegs for original Pegs Three different styles Anodized Silver, Gold, Red, Blue, Green Black Colors and styles, please click here |
US$70.00 a set |
 |
GSG Passenger Foot Pegs |
Replacement Foot Pegs for original Pegs Three different styles Anodized Silver, Gold, Red, Blue, Green Black Colors and styles, please click here |
US$70.00 a set |
 |
Oberon Foot Pegs |
Replacement Foot Pegs for original Pegs Anodized Silver, Black, Red, Gold, Blue or Grey Three different Styles: Closed, Oval or Stainless Steel Screws Colors and styles, please click here |
Starts at US$70.00 a set |
|
Rear Sets |
 |
GSG Rear Sets |
CNC Machined
aluminum. Double ball bearings 10 times adjustable, Adjustable brake & shift Pivot CNC machined master cylinder |
US$1050.00 |
|
Tail Lift Kit |
 |
Tail Lifter Kit |
Complete
Suzuki List Click Here 20 mm higher tail suspension links |
US$135.00 |
|
Lowering Kits Rear Suspension |
|
|
Lowering Kit |
Complete
Suzuki List Click Here 40 mm lower suspension links |
US$175.00 |
|
Oil Cooler Kits |
 |
GSG Oil Cooler Kit |
Oil Cooler Kit Brackets included. Stainless braided oil lines with red/blue or black/black fittings |
Red/Blue Fittings US$840.00 Black/Black Fittings |
|
Handle Bars / Booster Bar and Accessories |
 |
ABM Grips |
Available in Black/Black, Silver/Black, Gold/Black Aluminum grips with rubber middle piece More Grips click here |
US$100.00 Set |
 |
GSG |
6 times adjustable even while
riding Each Lever is only 60 grams light Race tested, Perfect design 6 colors for Lever and Pointer Short Lever: Approx. 50 mm shorter as original Long Lever: Approx. 20 mm shorter as original More information and complete list click here |
US$155.00 Each |
  |
GSG Stretched Fat Bar Clamps |
Stretched Fat
Bar Clamps 28.5 mm clamping area
CNC machined billet. Booster Low-Rise or Booster Superbike Handle Bar US$145.00 |
Alu nature US$175.00 Silver or Black Anodized |
 |
GSG Fat Handle Bars |
Low Rise Bar: 31 3/4 inch wide, 2 inch high, 2
inch pull back Superbike Bar: 29 1/4 inch wide, 2 inch high, 3 1/2 pull back
Aluminum Handle Bars available in: |
Low Rise US$140.00 Superbike |
 |
GSG 7/8 Handle Bars |
22 mm / 7/8 Aluminum in 8 different colors Click here for styles and pricing Matching Bar Ends US$25.00 |
Starts at |
|
Brake Lines, Reservoir & Rotors |
 |
GSG Brake Reservoir Rear |
Modification on bracket necessary CNC machined aluminum Billet, silver or black anodized |
Billet US$160.00 Silver or Black Anodized US$170.00 |
 |
GSG Brake Rotor "Flame" Front |
Ultra lightweight stainless steel rotor | US$340.00 Each |
 |
GSG Brake Rotor "Flame" Rear |
Ultra lightweight stainless steel rotor | US$200.00 |
 |
ABM Brake Rotor "Wave" |
Ultra lightweight stainless steel rotor, with titanium anodized
aluminum Solid (rear only) or full Floaters & Carrier. Top braking performance. |
Front US$310.00 Each Rear US$160.00 |
 |
Spiegler Brake Lines |
Standard stainless braided lines:
Silver fittings and clear covers. Fittings are available in: Gold, Chromed, Blue, Black, Purple, Red, Charcoal, Green Covers are available in different colors. More info about Spiegler. |
Rear
Brake Line Starts at US$57.00 Clutch Line Starts at US$68.00 2 Line
Front Kit 3 Line Front Kit |
|
G-Pack |
 |
Metisse G-Pack |
G-pack is a module which has the capability to
optimize the performance of your engine to
a maximum, particularly during the phases of acceleration from low to mid range. Ignition & Injection 2nd 2300-10500 Ignition & Injection 3rd 2200-10500 Ignition & Injection 3rd 2400-10500 Higher Revs in 5th Gear 250 km/h rev limitation is eliminated Gear indicator no function Limited speedometer |
US$305.00 |
|
Custom Parts |
 |
Oberon StreetFighter Mirror |
Universal fitting bar end mirrors. 60 mm or 75 mm diameter. Surface chrome glass and automotive standard convex giving superb visibility and weather resistance Collet fitting system. Aluminum components, black or silver anodized. 6 mm grub screws secure mirror in any position. Fits hollow handle bar diameters from 12 mm to 22 mm. More Mirrors Click Here |
60 mm glass US$70.00 75 mm glass each |
 |
GSG Mirror 1 |
Real Mirror Glass, -25% Convex Mirror Glass CNC Machined Aluminum Hand made in Germany Mirror turn able 360 degrees Available in black and silver More Mirrors Click Here |
Alu Nature US$140.00 each
Black Anodized |
 |
GSG Mirror Extensions |
CNC
Machined Aluminum Comes in a pair For all handle bar mounted mirrors Left and right threat |
Alu
Nature US$40.00 Black or silver anodized US$45.00 |
 |
Kellermann Turn Signals Polo LED White Glass |
Innovation! Latest top level technology integrated in the shapely metal body out of the home of Kellermann. In addition to our micro 1000 LED it has been felicitous to expand our product range to the micro 1000 LED white. Impressively is the clear brilliant glass, whereby open up brand-new design variations. Clear Lens, Amber LED Only turn signal, no running light This turn signal is not bigger as your pinky finger Click here for more Information |
Black, Chrome or Satin Chrome US$75.00 each signal |
 |
Kellermann Turn Signals Micro 1000 LED White Glass |
Innovation! Latest top level technology integrated in the shapely metal body out of the home of Kellermann. In addition to our micro 1000 LED it has been felicitous to expand our product range to the micro 1000 LED white. Impressively is the clear brilliant glass, whereby open up brand-new design variations. Clear Lens, Amber LED Only turn signal, no running light This turn signal is not bigger as your pinky finger Click here for more Information |
Black, Chrome or Satin Chrome LED Amber Lens US$70.00 LED Clear Lens US$75.00 each Signal |
 |
Kellermann Turn Signals Micro 1000 |
70 mm long, 17 mm high, 6W Halogen Light Bulb or LED This turn signal is not bigger as your pinky finger Click here for more Information |
Black, Chrome or Satin Chrome
6W Halogen |
 |
Kellermann |
The original bar end signals
made in Germany. Fits every hollow handle bar. White Lenses on both sides. Available in Aluminum (Black, Polished, Satin Chrome) Brass (Black, Satin Chrome) Stainless Steel ( Polished, Chrome, Dull) 21W Halogen Light Bulb Click here for more Information |
Starts at US$80.00 each |
 |
Kellermann |
The original bar end signal. |
Starts at |
|
B-King's |
 |
GSG B-King |  |
GSG B-King before and after |
 |
GSG B-King |
 |
RF B-King |
 |
RF B-King |
 |
Jimmy's B-King Alien Fairing GSG Radiator Side Covers GSG Front Fender GSG Passenger Peg Adapter GSG Tank/Frame Covers with clear lenses GSG Frame & Engine Protector GSG Fork and Swing Arm Sliders |
 |
Dave's B-King GSG Sprocket Cover |
 |
David's B-King GSG Sliders & GSG Engine Protector GSG Fork & Swing Arm Sliders GSG Booster Bar Clamps GR 205 Grips |
 |
B-King GSG Speed Screen Black |
 |
Chad's B-King GSG Speed Screen Black |
 |
James B-King GSG Tank / Frame Covers with clear lenses Oberon StreetFighter Mirrors |
 |
Alex's B-King RF Belly Pan in Carbon GSG Engine Sliders and a ton of PB carbon parts |
 |
Dave's B-King RF LED Tail Light / Tail Piece |
| Shipping is not included in the price. |
| Prices are subject to change. |
More StreetFighter
Accessories available. Check the link below!! |
