|
Turn
Signals made by |
|
|
|
Bullet 1000 Extreme |
Classic meets high Tech The Bullet 1000 Extreme absolute eye-catcher! Not only does is boast a sensational design, but also the new Extreme model is one of the brightest Kellermann indicators available. Never before has there been such versatility allowing use in multiple applications including cars, bikes and quads (homologated according to ECE 6). The Bullet Extreme can be installed within 20mm to the main headlamp. Kellermann High Power LED Technology uses two LEDs producing an extraordinarily bright indicator. Due to this greater illumination it is recognized much more quickly in traffic providing for maximum road safety. ECE-tested for front and rear - Increased safety due to enhanced visibility Applicable on many vehicles (ATVs, cars, super seven, trailers etc.) - Kellermann HighPower LED Technology - Long Life Protection Guard®, IC operated, 330 kHz - High quality metal housing - Suitable for 12 Volt applications 39 mm in diameter |
Chrome, flat chrome or black US$109.00 |
|
Bullet 1000 PL |
Classic meets high Tech The Bullet 1000 PL replace the front indicators because of their bright beam. Thanks to our IC operated Longlife Protection Guard® system with the latest high performance LEDs the Bullet 1000 LED series offers an especially high light output with almost unlimited life span. They are available with clear glass versions for all motorcycle models with 12 Volt applications. ECE-tested for front Improved safety because of brightness and direct response of the LED Kellermann HighPower LED Technology Long Life Protection Guard ®, IC operated, 330 kHz High quality metal housing Suitable for 12 Volt; Available in Black, Chrome or flat Chrome housing Amber turn signal and white running light. 39 mm in diameter |
Chrome, Flat chrome or black
US$119.00 |
|
Bullet 1000 DF |
Classic meets high Tech Our innovative indicator-brake-rear light combination in the stylish Bullet 1000 housing makes it possible to take a new direction when individualizing the rear of your bike. The characteristically bright double rear lights of the Bullet 1000 DF sets new standards. Using our tried and tested High Power LED Technology with IC-operated Longlife Protection Guard® system, the compact housing of the Bullet 1000 DF indicator-brake-rear light combination unit means reduced weight on all motorcycle models. 39 mm in diameter |
Chrome, Flat chrome or black US$119.00 |
|
Micro 1000 DF LED Dark |
||||
|
|
Rhombus DF LED Dark |
||||
|
|
Micro 1000 Extreme LED |
||||
|
|
Micro Rhombus Extreme LED |
||||
|
|
Micro 1000 LED Dark |
||||
|
|
Micro Rhombus LED Dark |
||||
|
||||
|
Micro 1000 PL LED |
|
Kellermann Micro 1000 PL LED
141.200
Front
Turn Signal |
New
Innovation in 2010! Long Lasting The Micro 1000 LED replace the front indicators because of their bright beam. Thanks to our IC operated Longlife Protection Guard® system with the latest high performance LEDs the micro 1000 LED series offers an especially high light output with almost unlimited life span. They are available in either modern clear or in the classic yellow glass versions for all motorcycle models, and 6 or 12 Volt applications. ECE-tested for front and rear Improved safety because of brightness and direct response of the LED Kellermann HighPower LED Technology Long Life Protection Guard ®, IC operated, 330 kHz High quality metal housing Suitable for 12 Volt; 6 Volt on request Available in Black, Chrome or Satin Chrome housing Amber turn signal and white running light. 70 mm long, 17 mm high |
Black Chrome US$89.95 each signal |
|
Micro Rhombus PL LED |
|
Kellermann Rhombus PL LED
147.200 /
250
Front
Turn Signal |
New
Innovation in 2010! Alpha Indicator The Micro Rhombus indicator has a striking design that is also available (PL version) with bright position lights. Thanks to modern high performance LEDs and our IC operated Longlife Protection Guard® system, manually operated*, with versions available for all motorcycle models, the micro Rhombus PL ensures better visibility in road traffic. In addition, they also allow others in traffic to better estimate your speed. With the crystal clear double look, it creates the impression of daylight-bright lights. *Existing running light may need to be deactivated ECE-tested for front Increased safety because of improved visibility Available in Black, Chrome or Satin Chrome housing Amber turn signal and white running light. 80 mm long, 21 mm high |
Black Chrome US$89.95 each signal |
|
Micro 1000 DF LED |
|
Kellermann Micro 1000 DF LED
K140.200
Turn / Tail & Brake |
New
Innovation in 2009! Simply Triple Our innovative indicator-brake-rear light combination in the stylish micro 1000 housing makes it possible to take a new direction when individualizing the rear of your bike. The characteristically bright double rear lights of the Micro 1000 DF sets new standards. Using our tried and tested High Power LED Technology with IC-operated Longlife Protection Guard® system, the compact housing of the micro 1000 DF indicator-brake-rear light combination unit means reduced weight on all motorcycle models*. * the existing dipped beam may need to be deactivated ** model specific indicator frequency versions are available, based on load independent relays or power resistors 70 mm long, 17 mm high |
Black or Chrome US$105.00 each signal |
|
Micro Rhombus DF LED |
|
Kellermann Rhombus DF LED 146.200 / 250
Turn / Tail / Brake |
New
Innovation in 2010! 1 + 1 = 3 Our innovative indicator-brake-rear light combination in our distinctive Micro Rhombus housing offers new styling options for the rear of your bike. The characteristically bright double rear lights of the Micro Rhombus DF are the latest trend in indicator design. The reliable and tested High Power LED Technology with IC operated Longlife Protection Guard® system and compact housing with combination indicator, brake and rear light means weight reduction with versions available for all motorcycles. ECE-tested for rear Replaces the existing brake/rear light and indicator Sensational new rear look Kellermann High Power LED Technology Long Life Protection Guard®, IC operated, 330 kHz High quality metal housing Suitable for 12 Volt applications Replaceable flexible rubber adapter which protects the indicator from vibration damage and vandalism Turn signal, tail light and brake light. Available in Black, Chrome or Satin Chrome housing 80 mm long, 21 mm high |
Black Chrome US$105.00 each signal
Titanium polished and satin finish price upon request |
|
Micro 1000 LED Clear Glass |
 |
Kellermann Turn Signals Micro 1000 LED White Glass
127.200
|
Long lasting |
Black Chrome US$74.95 each signal |
|
Micro 1000 LED Amber Glass |
 |
Kellermann Turn Signals Micro 1000 LED Amber Glass 125.200 |
Long lasting |
Black Chrome US$64.95 each signal |
|
Micro Rhombus LED |
|
Kellermann Turn Signals Rhombus LED White Glass
126.200 /
250
|
Corners and edges Made
in Germany |
Black Chrome US$74.95 each signal
Titanium polished and satin finish coming soon |
|
Micro 1000 Halogen H6W |
 |
Kellermann Turn Signals Micro 1000 123.200 |
This classic indicator combines
tested Halogen technology with stylish, timeless design. Its
compact build and high quality metal housing mean reduced
weight. It is the ideal companion to our BL 1000 series bar end
indicators. Suitable versions available for all motorcycle
models. |
Black Chrome US$43.95 each signal |
|
Bar Ends Signals BL 2000 LED |
|
 Kellermann Bar End Signal BL 2000 LED Dark 110.200 |
Be seen but not seen BL 2000 Dark with strongly tinted glass Made in Germany ECE-tested for front Tinted ring-shaped lens – spectacularly bright A turn indicator which is also an elegant complement to your handlebars Indicators visually merge into the bike when not in use Kellermann HighPower LED technology Long Life Protection Guard®, IC controlled, set at 330 kHz High quality metal casing Suitable for motorcycles with 12 volt electrical systems Available in black The BL 2000 further expands the Dark Design range with a small handlebar end turn indicator which elegantly completes the line of the bars. Its tinted ring-shaped lens sits unobtrusively in the black metal casing. Although the turn indicator mounts discreetly on the motorcycle, when in use it shows its true size and will surprise you with its highly noticeable bright flashing. This is achieved by the use of the very latest development in Kellermann HighPower LED technology. Also included are adapters for fitting to all current handlebar types. A load-independent relay or power resistors may be required to match indicator signal frequency |
Black Housing Black Lens US$109.00 |
|
Bar Ends Signals BL 1000 LED |
 |
Kellermann Bar End Signal BL 1000 LED Dark 122.100 |
Perfectly disguised The BL 1000 Dark brings light into darkness and sets new standards in motorcycle design. This innovative design appears like a seamless extensions of the handle bar. The latest high performance LED's and our IC operated Longlife Protection Guard® system make for a spectacularly bright indicator signal. The newly proportioned housing shape gives a clear line at the end of the handlebar. The BL 1000 Dark liberates styling from the restraints imposed by conventionally styled front indicators and combines indicating function with handlebar vibration damping. Combined with the micro 1000 Dark it gives a perfect look. Versions and adapters for most model handlebars are available. The BL 1000 LED Dark has 2 lenses with 2 LED's for front and 1 LED for back |
Black Housing Black Lens US$135.00 |
 |
Kellermann Bar End Signal BL 1000 LED PL
121.200
|
See and be seen: |
Black Chrome Clear Glass US$135.00 each |
 |
Kellermann Bar End Signal BL 1000 LED 120.200 |
New, and already a
classic The BL 1000 LED is the latest development in bar end indicators. Our IC operated Longlife Protection Guard® system, modern high power LED's and innovative clear glass look mean performance as well as beautifully proportioned styling at the end of the handlebar. The BL 1000 LED combines function with handlebar vibration damping. Versions are supplied with necessary adapters for mounting on most handlebars. The BL 1000 LED has 2 lenses with 2 LED's to the front, 1 LED for the rear. |
Black Chrome Clear Glass US$115.00 each |
|
Bar Ends Signals BL 1000 H21W |
   |
Kellermann |
The original bar end signals
made in Germany. Licensed protected design BL 1000 Spare parts see below |
Billet Black US$97.95 Billet Polished US$99.95  Brass Black US$109.95Brass High Gloss
Chrome US$119.95Stainless Polished US$125.00each signal |
  |
Kellermann |
The original bar end signals
made in Germany. Licensed protected design BL 1000 Spare parts see below |
Billet Black US$74.95 Billet Polished US$79.95 Brass Black
US$79.95Brass High Gloss
Chrome
US$99.95Stainless Polished
US$105.00each signal
|
|
Flasher-Alarm-Unit R3 |
|
|
Kellermann
|
A smart module -
indicator relay with integrated alarm unit and hazard flasher unit This high-end flasher module is a
smart unit over and above other exchange flasher relays. It is
configured with intuitive smart functions and has an integrated warning
flasher and alarm system built-in. In addition is also has an integrated
flasher reset memory and battery protection. Should the supply voltage
drop below 11 volts, the alarm system switches off in order to prevent
damage taking place to the battery. As with all Kellermann flasher
relays, the in some cases occurrence of unwanted additional flashing of
non-activated turn indicators has also been cured. The flasher rate is
load independent and is set at a steady 75 pulses / min. The casing is
metal and very slim allowing for a simple concealed installation on any
motorcycle. The unit can be fixed to the motorcycle in the simplest way
using the accompanying mounting strip. Despite the unit’s many
functions, connection is very simple. In addition to the standard
connections for this kind of relay, all that’s required are further
connections to the horn and a constant power feed. The unit can be
switched between two convenience function modes: |
US$139.95
|
|
Flasher-Unit R1 |
|
|
Kellermann
|
Micro relay for the pros Made in Germany The R 1 flasher relay has very small dimensions (21x11x6 mm) and flashes independently of load at a steady 75 pulses per minute. It also has a connection available for the flasher dashboard light. It is easily installed into the feed to the flasher switch, or can be swapped with the original flasher relay. It is therefore suitable for all motorcycles with flasher switches. Should the switch to LED flashers result in the non-intentionally activated turn indicators also flashing; then the flasher dashboard light must also be connected to the R 1 relay. The ‘hazard warning’ effect will then be effectively cured. All necessary components required for installation are included. |
US$41.95
|
|
Flasher Relay, Load-independent |
|
|
Kellermann
|
The classic one
flasher relay The load independent R 2 flasher relay is
the universal problem solver when using LED and halogen turn indicators.
It replaces all original 2-3 pole flasher relays and delivers a constant
and correct flashing frequency. Connection is simple. If following the
conversion to LED turn indicators, the non-activated indicators also
flash, then all that is required is for the relay to be connected to a
left and a right indicator in order to reliably cure this problem .* All
necessary components required for installation are included. |
US$41.95
|
|
Kellermann turn
signals have a world wide patent. |
|
Spare Parts & Accessories |
 |
Flexible
silent-rubber fixation, with 20 mm or 40 mm M8 fastening screw thread
protects the micro 1000 against motor vibration. |
20 mm US$8.40 40 mm |
 |
Black or Chrome Ball ended linkage for inclined surfaces Enables a horizontal alignment of the Micro 1000 when mounting it on inclined surfaces. |
US$20.00 ea |
 |
Black or Chrome This rigid fixation arm, which has a M8x20 mm or 40 mm thread. Replaces the original silent rubber adapter. |
US$10.60 ea |
 |
25 mm or 40 mm
long. Black or Chrome With this extension the length of the indicator arm can be elongated. The extension is simply screwed in between the silent rubber adapter or rigid fixation and the indicator body. |
25 mm US$5.30 40 mm US$7.50 ea |
 |
This adapter enables fixation of the micro 1000 M8 fastening screw thread to motorcycles with an original M12 fastening screw thread. | US$4.00 ea |
 |
H6W Halogen light bulb H6W Individual halogen light bulb as spare part. | US$7.00 ea |
 |
turn signal glass micro 1000 Individual turn signal glass as spare part. | US$12.80 ea |
 |
Ohmic resistor (for 21W indicator relays) The extreme small construction of the micro 1000 demanded the application of a 6W halogen light bulb, which is different in the power of commonly used 21W light bulbs. The ohmic resistor can be mounted at any position in parallel to the micro 1000. Together with the micro 1000 this resistor “simulates” a conventional 21W indicator. | US$9.00 ea |
|
|
Ohmic resistor (for 21W indicator relays) The extreme small construction of the micro 1000 demanded the application of a LED Signal, which is different in the power of commonly used 21W light bulbs. The ohmic resistor can be mounted at any position in parallel to the micro 1000 LED. Together with the micro 1000 LED this resistor “simulates” a conventional 21W indicator. | US$10.00 ea |
|
Spare Parts for BL 1000 |
 |
Individual light bulb H21W as spare part. | US$7.50 ea |
 |
The BL 1000
multifunction part as a spare part with plus contact and cable, however without fixating rubber band adapters and nut. |
US$16.00 ea |
 |
Turn signal glass F or R for in the front or rear, individual as spare part. | US$11.00 ea |
 |
This additional
ground cable helps to establish an electrical connection between the BL
1000 and the motorcycle in case problems occur (for example with aluminum
or rubber fitted handlebars). 17-22mm & 21-24mm |
US$7.00 ea |
 |
This set includes
all rubbers, flat washer and nut for fixation of the BL 1000 into
motorcycle handlebars with an inner diameter between 11,5 till 24 mm. (Included in each BL 1000 box) |
US$7.00 ea |
 |
Indicator body
with lenses, only in exchange for the damaged indicator body In case the
turn signal is damaged, it often suffices to exchange only the less cost
intensive indicator body/head. All other parts, including the multifunction part, can be kept on being used. |
Starts at US$45.00 ea |
 |
Indicator
body with lenses, only in exchange for the damaged indicator
body In case the turn signal is damaged, it often suffices to
exchange only the less cost intensive indicator body/head. All other parts, including the multifunction part, can be kept on being used. |
Starts at US$60.00 ea |
 |
The BL 1000 socket as a spare part for the light bulb used in the BL 1000 turn signal. | US$10.00 ea |
|
Gallery of Kellermann Signals |
 Z 1000 with Rhombus DF signals |
 ZRX BL 1000 Brass Black / Clear Lens |
 Left Micro 1000 H6W Right Original |
 Bandit 600 Kellermann Micro 1000 DF LED |
 VRod Mirco 1000 |
 ZX 12R Micro 1000 |
 ZRX Mirco 1000 |
 Buell Micro 1000 |
 R 1 Micro 1000 H6W |
 Ducati 748 Micro 1000 |
 ZRX Micro 1000 LED Clear |
 Lotus Seven Micro 1000 LED Clear Lens |
 ZRX BL 1000 Bar End Turn Signals Black Brass |
 Softail Micro 1000 |
 Bandit 1200 BL 1000 Bar Ends Turn Signals |
 919 / Hornet 900 Micro 1000 |
 CBR 600 RR Micro 1000 |
 Trailer Micro 1000 Red LED/Clear Lens |
 Harley BL 1000 Bar Ends Signals |
| Shipping is not included in the price. |
| Prices are subject to change. |
|
Info@whaccessories.com
